for further information contact your local stmicroelectronics sales office. april 2012 doc id 023146 rev 1 1/3 3 STM320518-EVAL STM320518-EVAL evaluation board data brief features three 5 v power supply options: ?power jack ? st-link/v2 usb connector or daughter board audio speaker and microphone connected to the stm32f051r8t6 dac and adc 2gbyte or more microsd card with spi interface temperature sensor and rf eeprom accessible through i 2 c compatible serial interface rs232 and rs485 communications irda transceiver. ir led and ir receiver. swd debug support, and embedded st- link/v2 240x320 tft color lcd connected to the stm32f051r8t6 spi interface joystick with 4-direction control and selector reset, tamper and user buttons. 4 color user leds extension connector for daughter board or wrapping board mcu voltage: fixed to 3.3 v, or adjustable from 2 to 3.6 v touch slider light dependent resistor (ldr) potentiometer two hdmi connectors with ddc and cec motor control connector rohs compliant board (lead free) description the STM320518-EVAL evaluation board is a complete demonstration and development platform for the stm32 f0 series entry-level mcus. it includes an stm32f051r8t6 arm cortex-m0 32-bit microc ontroller with 64kb of flash memory. the board offers are full range of hardware features to help you evaluate all peripherals (motor control, rs232, rs485, audio dac, touch slider, microphone adc, tft lcd, irda, ir led, ir receiver, ldr, mi crosd card, cec on two hdmi connectors, rf e2prom & temperature sensor? etc.) and develop your own application. extension headers allow to easily connect a daughter board or wrapping board for your specific application. an st-link/v2 is integrated on the board as embedded in-circuit debugger and programmer for the stm32f051r8t6 mcu. www.st.com
ordering information STM320518-EVAL 2/3 doc id 023146 rev 1 1 ordering information 2 revision history table 1. device summary order code reference STM320518-EVAL stm32 f0 series evaluation board table 2. document revision history date revision changes 23-apr-2012 1 initial release.
STM320518-EVAL doc id 023146 rev 1 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
